Real‐Time In Vivo Detection of Cellular Senescence through the Controlled Release of the NIR Fluorescent Dye Nile Blue

In vivo detection of cellular senescence is accomplished by using mesoporous silica nanoparticles loaded with the NIR‐FDA approved Nile blue (NB) dye and capped with a galactohexasaccharide ( S3 ). NB emission at 672 nm is highly quenched inside S3 , yet a remarkable emission enhancement is observed upon cap hydrolysis in the presence of β‐galactosidase and dye release. The efficacy of the probe to detect cellular senescence is tested in vitro in melanoma SK‐Mel‐103 and breast cancer 4T1 cells and in vivo in palbociclib‐treated BALB/cByJ mice bearing breast cancer tumor.     

On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.     

Solubility enhancement of ibuprofen using tri-ureasil-PPO hybrid: structural,cytotoxic, and drug release investigation

Herein, we used tri-ureasil organic–inorganic hybrid material (tU5000) in order to enhance the solubility of nonsteroidal anti-inflammatory drugs and fine tuning the drug delivery profile. For the first time, we used tU5000 as a film-forming agent in order to provide an alternative vehicle for transdermal drug delivery systems which the cell viability of practically 100 % for the highest and the lowest tested concentrations of pure tU5000 indicated that the material was not cytotoxic. The physicochemical properties of the tU5000 drug carrier and drug-loaded hybrids were systematically studied using powder X-ray diffraction, differential scanning calorimetry, small-angle X-ray scattering, and Fourier-transform infrared spectroscopy. The structural changes of tU5000 as well as the relationships between the drug content and in vitro drug release behaviors were investigated. The results showed that the ibu molecules were homogeneously distributed in the tU5000 xerogels contributing to fine-tuning the drug delivery profile. Considering the ability to incorporated high drug content, simple and mild preparation procedure by one-pot sol–gel route, high stability of the materials, sustained-release property, this class of hybrid based on polymers and inorganic compounds may have potential applications in the design of pharmaceutical formulation as ophthalmic (contact lenses), transdermal (patches) and implantable (soft tissue) drug delivery systems.     

Fast chromatographic method for the determination of dyes in beverages by using high performance liquid chromatography—Diode array detection data and second order algorithms

A fast chromatographic methodology is presented for the analysis of three synthetic dyes in non-alcoholic beverages: amaranth (E123), sunset yellow FCF (E110) and tartrazine (E102). Seven soft drinks (purchased from a local supermarket) were homogenized, filtered and injected into the chromatographic system. Second order data were obtained by a rapid LC separation and DAD detection. A comparative study of the performance of two second order algorithms (MCR-ALS and U-PLS/RBL) applied to model the data, is presented. Interestingly, the data present time shift between different chromatograms and cannot be conveniently corrected to determine the above-mentioned dyes in beverage samples. This fact originates the lack of trilinearity that cannot be conveniently pre-processed and can hardly be modelled by using U-PLS/RBL algorithm. On the contrary, MCR-ALS has shown to be an excellent tool for modelling this kind of data allowing to reach acceptable figures of merit. Recovery values ranged between 97% and 105% when analyzing artificial and real samples were indicative of the good performance of the method. In contrast with the complete separation, which consumes 10 mL of methanol and 3 mL of 0.08 mol L⁻¹ ammonium acetate, the proposed fast chromatography method requires only 0.46 mL of methanol and 1.54 mL of 0.08 mol L⁻¹ ammonium acetate. Consequently, analysis time could be reduced up to 14.2% of the necessary time to perform the complete separation allowing saving both solvents and time, which are related to a reduction of both the costs per analysis and environmental impact.     

Aggregation Behavior of Pyridinium-Based Ionic Liquids in Aqueous Solution

Aggregation of the ionic liquids 1-butylpyridinium tetrafluoroborate, 1-butylpyridinium triflate, 1-butyl-2-methylpyridinium tetrafluoroborate, 1-butyl-3-methylpyridinium tetrafluoroborate, 1-butyl-4-methylpyridinium tetrafluoroborate, 1-butyl-3-methylpyridinium dicyanamide, and 1-octyl-3-methylpyridinium tetrafluoroborate in aqueous solution has been characterized at 298.15 K through density, ρ, speed of sound, u, and conductivity, σ, measurements. In addition, apparent molar volumes, V _φ , and isentropic compressibilities, κ _s , have been calculated from the experimental data. To characterize the formation of aggregates, the critical aggregation concentration of the ionic liquids, cac, the degree of ionization of the aggregates, β, and the standard Gibbs energy of aggregation, DG_m^°\Delta G_{\mathrm{m}}^{\circ}, have been obtained, with good agreement between results derived from the different methods. The dependence on the structural variation of these ions has been analyzed by comparing the results obtained for this series of ionic liquids.     

Proficiency testing in analytical chemistry, microbiology and laboratory medicine: working discussions on current practice and future directions

A summary of the working group (WG) discussions on proficiency testing (PT) and external quality assessment (EQA) held at the Eurachem Workshop, Rome, 5–7 October 2008 is provided. The eight WG’s covered a range of issues concerned with current practice and future directions; how frequently should laboratories participate in PT/EQA? (WG1); developments in PT/EQA within the EU—what is required in future? (WG2); what issues do developing countries face with regards to PT/EQA? (WG3), what issues are specific to microbiology PT/EQA? (WG4); what new fields are emerging for PT/EQA? (WG5); what will be the impact of the new ISO/IEC 17043 standard? (WG6); do current PT/EQA schemes meet the needs of participants? (WG7); and what are the issues that affect the quality of proficiency test items? (WG8). Delegates with different backgrounds were on each WG in order to capture a range of views and experience from a number of different sectors. Working group representatives included PT/EQA providers, participants in PT/EQA schemes and end users of PT results such as accreditation bodies and regulatory authorities, from countries around the world.     

Analysis of the Lipidome of Xenografts Using MALDI-IMS and UHPLC-ESI-QTOF

Human tumor xenografts in immunodeficient mice are a very popular model to study the development of cancer and to test new drug candidates. Among the parameters analyzed are the variations in the lipid composition, as they are good indicators of changes in the cellular metabolism. Here, we present a study on the distribution of lipids in xenografts of NCI-H1975 human lung cancer cells, using MALDI imaging mass spectrometry and UHPLC-ESI-QTOF. The identification of lipids directly from the tissue by MALDI was aided by the comparison with identification using ESI ionization in lipid extracts from the same xenografts. Lipids belonging to PCs, PIs, SMs, DAG, TAG, PS, PA, and PG classes were identified and their distribution over the xenograft was determined. Three areas were identified in the xenograft, corresponding to cells in different metabolic stages and to a layer of adipose tissue that covers the xenograft.

Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC

Melamine is a toxic triazine, illegally used as an additive in milk to apparently increase the amount of protein. A chromatographic procedure using a C18 column and a micellar mobile phase of sodium dodecyl sulphate (0.05 M) and propanol (7.5%), buffered at pH 3, and a detection set by absorbance at 210 nm, was reported for the resolution and quantification of melamine in liquid and powdered milk samples. In this work, samples were diluted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in nearly 9.3 min without overlapping the protein band or other endogeneous compounds. The optimal mobile phase composition was taken using a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the European Commission's indications (European Decision 2002/657/EC), and the main analytical parameters studied were: linearity (0.02-100 ppm; r² = 0.999), limit of detection (5 ppb), intra- and inter-day precision (R.S.D. <7.6% and <9.7%, respectively) and robustness (R.S.D. <7.4% for retention time and <5.0% for area). Sensitivity was adequate to detect melamine under the safety limits proposed by the US FDA. Finally, recoveries for several milk samples were found in the 85-109% range.